Heat pumps in Portland are a valuable addition to any home because these devices are suitable for use at any time of the year. Warm air can be transported either inside a property or outside, depending on the requirements of the user and because heat pumps generate heat differently to the way a furnace generates heat, they are a more affordable option. Despite this, if your heat pumps in Portland are lacking in efficiency, your bills could creep up. By understanding ways to boost the efficiency of these appliances, you can save money on bills and increase the longevity of the heat pump.
All heat pumps in Portland are fitted with filters and these filters are relied on to remove bad particles from the air. When a filter works properly the air quality inside the home will ameliorate and air will be able to travel quickly. However if the filter is dirty the efficiency will lower drastically and this will impact your bills, aggravate allergies and put more pressure on the system. Check the filers on your heat pump every month or every fortnight, depending on how often you use it. If they look dirty, replace them and this is very important before summer and winter when the appliance is likely to be used more often. When examining the filters, look at the ductwork too because air flow leakages will decrease the efficiency.
Location and Maintenance
When getting heat pumps in Portland installed, you should think about the location of the device. Because heat pumps will have a section that fits on the exterior of the home, it is imperative that you shield the device from any hardships that the weather may bring. For example, if you have a tall fence on the exterior of your property, place the outside unit here so that gale force winds do not affect the performance of the device. To ensure the system is working to the best of its ability, arrange a service with a professional at least once a year.
The thermostat on heat pumps in Portland will be an integral component because with this tool you can monitor the temperature and change it to suit your needs. Programmable thermostats are becoming increasingly popular because these enable you to set a temperature to kick in at particular times of the day. Therefore if you will be out of the house for a few hours, the thermostat can be programmed to work half an hour before you return home so that the temperature is satisfactory and electricity usage is lowered.
The more often you maintain your heat pumps in Portland, the lower the chances of a problem occurring. To arrange a service and to browse through a range of efficient heat pumps, visit Eastside Heating and Air Conditioning at eastsideheating.com